A Cool Heat pre-purchase inspection is built for buyers and property owners who need to know what they're actually getting. We inspect the full mechanical scope — furnace, boiler, water heater, air conditioning, venting, and controls — and document the condition of each system, expected remaining life, and any code or safety issues found. The report goes to you in writing, ready to share with your lender, insurer, or real estate team.

Contact Cool Heat Inspections to get started.

Our mechanical safety inspections protect building owners, property managers, and their occupants from preventable hazards, code violations, and the liability exposure that comes with both. We inspect the full mechanical system — boilers, furnaces, air conditioning, water heaters, venting, and heat pumps — for code compliance, combustion safety, ventilation, and carbon monoxide risk. You receive a written report identifying every issue found, its severity, and the recommended corrective action. Call today and get the Cool Heat safety inspection you're building and its people deserve. 

 A new home doesn't mean a problem-free mechanical system. Equipment gets installed under deadline pressure, and finished walls hide a lot. Our new construction inspection verifies your heating, cooling, water heating, and ventilation systems are installed correctly, sized properly, and code-compliant — before your builder warranty runs out. You receive a written report documenting every issue found, with photos and recommendations for builder corrections. 

Colorado pool heating equipment lives in one of the harshest environments — chlorine, humidity, condensation, and tight equipment rooms accelerate wear and create safety risks that general inspections miss. Our pool boiler safety inspection covers combustion safety, heat exchanger integrity, gas line and pressure relief, venting, condensate management, electrical safety, carbon monoxide risk, and code compliance for both the equipment and the equipment room. We document any issues found, their severity, and the corrective action required — a defensible record for your maintenance team, insurer, regulator, or HOA board. Especially valuable for apartment complexes, HOAs, hotels, country clubs, gyms, and recreation centers. Call today and get the Cool Heat inspection your pool and your facility, deserve!

Apartment buildings, HOAs, country clubs, hotels, and commercial property owners need annual documentation that their mechanical systems are safe and code-compliant — for insurers, regulators, lenders, and their own peace of mind. Our annual inspection program covers your full mechanical scope — boilers, furnaces, air conditioning, water heaters, venting, hydronic distribution, and controls — with a written report documenting current condition, expected remaining life, and a prioritized maintenance plan. Enrolled properties receive same-month scheduling and a consistent inspector who knows your building year over year.  Call today and put your building on the Cool Heat annual program. 

When mechanical failures cause property damage, injury, or dispute, attorneys and insurers need a Denver mechanical expert witness who can investigate, document, and testify with credibility. Cool Heat Inspections, LLC provides expert witness and litigation support for construction defect, premises liability, insurance subrogation, HOA, and commercial property disputes — including carbon monoxide incidents, boiler and furnace failures, workmanship disputes, and code compliance issues involving heating, cooling, and mechanical systems. Services include case review, forensic on-site inspection, expert reports, deposition and trial testimony, and mediation support for Denver metro attorneys, insurers, and property owners. 

A Cool Heat Denver furnace certification gives buyers, sellers, real estate professionals, and property owners documented confirmation that the furnace is safe, code-compliant, and operating as designed. We inspect the heat exchanger for cracks and corrosion, verify combustion safety and carbon monoxide levels, test ignition and gas valve operation, evaluate venting and draft, and check electrical connections and safety controls. Every certification is performed by a licensed Denver mechanical supervisor, with a written report ready to share with your lender, insurer, buyer, or seller. Call today and get the Cool Heat furnace certification.

 Cool Heat Denver boiler certifications give building owners, property managers, real estate professionals, HOA boards, and buyers documented confirmation that the boiler is safe, code-compliant, and ready to operate. We evaluate the heat exchanger, combustion chamber, pressure relief valves, expansion tanks, low-water cutoffs, safety controls, venting, and gas and ignition operation. Every certification is performed by a licensed Denver mechanical supervisor holding an active Class A Steam & Hot Water license. You receive a written certification report, ready for your lender, insurer, board, or regulator.  Call today and get the Cool Heat boiler certification your building deserves. 

A Cool Heat thermal imaging inspection sees what the naked eye cannot — missing insulation, hidden moisture, electrical hot spots, overheating motors, blocked vents, failed steam traps, and the thermal leaks quietly burning your energy budget. We use calibrated infrared imaging as a standalone service, or as part of our in-depth mechanical inspections when a building's history or complexity calls for it. You receive a written report, complete with images, locations, and recommended corrective action.  Call Cool Heat today and see what your building has been hiding. 

Carbon monoxide is the silent killer in residential and commercial buildings — odorless, invisible, and produced by every fuel-burning appliance in your property. A Cool Heat carbon monoxide inspection identifies the source and severity of CO risk in your home or building. We perform combustion analysis on furnaces, boilers, water heaters, and gas-fired equipment, evaluate ventilation and draft, measure ambient CO levels, and verify your CO detectors are correctly placed and functioning. You receive a written report documenting every source identified, current risk level, and the corrective action required to keep occupants safe. Call today and get the Cool Heat CO safety report your family or building needs. 

Selling a property without knowing its mechanical condition is handing the buyer your negotiation leverage on a silver platter. A Cool Heat pre-listing inspection puts you back in control before your property hits the market — we inspect your furnace, boiler, air conditioning, water heater, venting, and controls, and give you a clear written report of what works, what needs attention, and what could become a price-cutting issue at the negotiation table. Fix what's worth fixing, disclose what's not, and walk into closing without surprise repair credits or last-minute drama. 

Denver commercial property owners, investors, and asset managers need more than a checklist when acquiring, financing, or maintaining commercial real estate. A Cool Heat commercial mechanical inspection covers rooftop units (RTUs), commercial boilers, chillers, water heaters, makeup air units, exhaust systems, hydronic distribution, gas piping, and building automation. We assess condition, remaining service life, code compliance, and capital repair exposure across the full mechanical footprint — documenting what's operating, what's failing, and what will cost real money over the next five years.  Call today and inspect Denver commercial mechanical the Cool Heat way. 

From the roof down, nothing gets missed. Using a FAA-certified drone pilot and high-definition camera technology, we conduct detailed visual inspections of rooftop mechanical equipment, exhaust vents, flues, chimneys, and roof-mounted HVAC units — areas that are often difficult, expensive, or unsafe to access with scaffolding, ladders, or lift rentals. Our aerial inspections capture close-up, high-resolution imagery of equipment condition, vent and flue integrity, and roof penetrations, allowing us to spot corrosion, damage, and wear before they become costly problems — giving property owners, real estate professionals, and insurers a clear, documented record without the cost, delays, or liability risk of physical roof access. 

All roof inspections are conducted by FAA Part 107 certified drone pilots using thermal imaging, covering TPO, EPDM, and other commercial roofing systems along with rooftop mechanical equipment — without the cost or risk of ladders or scaffolding. Thermal imaging identifies moisture intrusion, seam failures, and heat loss invisible to the naked eye, giving you a complete picture of your roof's condition. 

 Where is your building losing energy?

Thermal imaging inspections use infrared technology to identify where heat is escaping. Using a FAA-certified drone pilot with thermal camera technology, we scan roofs, walls, windows, doors, and building envelopes to pinpoint insulation gaps, air leaks, poor seals, and thermal bridging that standard visual inspections can't detect. For property owners and managers, that means lower utility costs, a clear roadmap for insulation or sealing upgrades, and documented evidence to support energy efficiency improvements., a thermal inspection gives you a clear, unbiased picture of where your building is losing and or gaining heat.

Photovoltaic solar panels are built to last, but hotspots, cracked cells, and wiring faults don't always show up to the naked eye. Using FAA-certified drone technology with thermal imaging, we inspect rooftop and ground-mount solar arrays panel by panel, identifying underperforming cells, connection issues, and heat anomalies without the cost or risk of manual roof access. Whether you're verifying system performance, completing investment due diligence, or troubleshooting reduced output, our aerial solar inspections give you a clear, documented picture of your system's condition. 

Asbestos is a dangerous substance that can cause serious health problems, and it's commonly found in older mechanical systems — pipe insulation, boiler wrap, gaskets, and duct sealant are frequent hiding spots in buildings built before the 1980s. Our asbestos testing identifies potential hazards around boilers and mechanical rooms before they become a health or liability concern, with a comprehensive report on findings and recommendations.

 After a hail event, timing matters most. Our FAA-certified drone inspections capture detailed, timestamped documentation of hail and storm impact to roof-mounted mechanical equipment like AC units — dented flashing, damaged flues and vents, dislodged exhaust caps, and compromised roof penetrations around your HVAC and mechanical systems. This gives property owners and insurance teams a clear, unbiased record to support claims fast, without the cost or risk of manual roof access.